Oil and Gas

Oil and Gas | Geophysics and Seismic Interpretation

The Practice and Theory of Seismic Depth Imaging: Conventional and Unconventional Plays

Course Code: N469
Instructors:  David Kessler
Course Outline:  Download
Format and Duration:
3 days
6 sessions

Summary

Many petroleum companies routinely utilize pre-stack depth imaging technology in seismic processing workflows for both conventional and unconventional plays. Participants will become familiar with the underlying theory and current industry practices in the application of pre-stack depth imaging technology in conventional and unconventional plays through the use of case studies located in both onshore and offshore environments. Depth imaging provides superior results compared to time processing including accurate time-to-depth conversions for well planning, reliable velocity models for pore pressure prediction, and superior geohazard identification.

Business Impact: The depth imaging knowledge acquired in this course will enable participants to improve success rates and decrease drilling risks by reducing structural uncertainty and developing better technical decisions.

Duration and Training Method

This 3-day course combines lectures, case history discussions and several classroom exercises.

Course Overview

Participants will learn to:

  1. Investigate the differences between time and depth imaging and understand the practical benefits of utilizing pre-stack seismic imaging workflows.
  2. Evaluate the various methods currently in use for pre-stack depth imaging.
  3. Investigate the influence of anisotropy in depth imaging.
  4. Demonstrate how velocity models are constructed and optimized for pre-stack depth imaging projects.
  5. Construct practical interpretation workflows to analyze sub-salt seismic data.
  6. Supervise the parameterization of pre-stack depth migration projects.

Topic I – Basic Concepts

  • Chapter 1: General Review: Time and Depth Imaging Methods
  • Chapter 2: The Theory of Post Stack and Pre-stack Depth Migration
  • Chapter 3: From Theory to Practice: Migration Parameterization
    • Basic concepts and methods in both time and depth processing
    • Analysis of wave propagation
    • Offshore sub-salt example
    • Onshore faulted section example
    • Ray based depth migration
    • Kirchhoff summation migration
    • Travel time calculation used in ray-based depth migration
    • Wave equation downward continuation
    • Wave equation imaging condition
    • One-way wave equation depth migration
    • Two-way wave equation depth migration
    • Anisotropic depth migration
    • Computer hardware using for depth imaging
    • Parameterization of depth migration algorithms
    • Depth migration operator dip
    • Depth migration aperture
    • Depth migration frequency range
    • Various types and uses of PSDM image gathers

Topic II – Model Building and Depth Imaging

  • Chapter 4: Seismic Velocities and Velocity Estimation Techniques
  • Chapter 5: Anisotropy and Time-to-Depth Conversion
  • Chapter 6: Interpretation and Model Building
    • Definitions of velocity fields used in seismic processing and depth imaging
    • Velocity analysis techniques
    • Implementation of Reflection tomography
    • Implementation of Full waveform inversion
    • Time to depth conversion using pre-stack depth migration
    • Seismic to well mistie analysis and correction
    • Definition of anisotropic models
    • Wave propagation in an anisotropic media
    • Model building and depth imaging of unconventional plays
    • Estimation of fracture orientation using azimuthal anisotropy
    • Onshore conventional fault shadow example
    • Onshore unconventional shale play example
    • The link between velocity models and pre-stack depth migration results
    • Salt model building workflow
    • Models for imaging of over thrust geology
    • Fault shadows
    • Construction of anisotropic models for unconventional plays

Topic III – Interpretation and Analysis

  • Chapter 7: Velocity Model and Image Quality
  • Chapter 8: Imaging and Interpretation of Sub-Salt Sediments
  • Chapter 9: PSDM Amplitudes
  • Chapter 10: Depth Imaging Projects, Workflows and Examples
    • Optimization of velocity models
    • The relation between anisotropic models and image accuracy
    • Challenges of imaging and interpretation of the subsalt section
    • Sub-salt multiples, converted waves and prism waves
    • Offshore sub-salt example
    • Onshore over thrust example
    • Ray based illumination
    • Migration illumination
    • Amplitude preserved pre-stack depth migration
    • Wave equation normalization
    • Impedance inversion using pre-stack depth migrated gathers
    • Depth imaging workflows
    • Steps for execution of depth imaging projects
    • The link between depth imaging technology and exploration and development

This course has been designed for both seismic interpreters and geophysicists involved in any use or evaluation of seismic data. The course is very suitable for engineers that are using seismic data to optimize drilling programs. Course participants will be able to successfully understand depth migrated seismic data, know how to differentiate signal from artifacts, understand new methods and workflows, and learn about the state-of-the-art of seismic depth imaging technology. The course is very much recommended to QI geophysicists working with seismic data as input to seismic inversion and evaluation of rock properties.

 

David Kessler

Background

David Kessler is the President of SeismicCity Inc., a company dedicated to the development and implementation of depth imaging technology. David holds a B. Sc., M. Sc. and Ph. D. degrees in Geophysics. At the start of his career David worked as a research Geophysicist. From 1991 to 1994 he was a Senior research Geophysicist for Landmark/ITA, and from 1994 to 1996, he was a Senior research Geophysicist for Cogniseis Development. In 1996 David changed his focus from research to application, by becoming the Manager of Depth Imaging Services for CGG Americas. In this roll he worked to establish a depth imaging group that would provide model building and depth imaging seismic processing services for CGG in North and South America.

In early 2000, together with several other colleagues, David created an independent seismic processing company called SeismicCity, with the objective to develop proprietary model building and depth imaging technology and to provide this technology in execution of commercial depth imaging projects. SeismicCity is located in Houston Texas. Using its proprietary technology, the company provides pre-processing, anisotropic model building, prestack depth migration and data analysis services to its clients exploring for oil and gas in various geological environments around the globe.

Affiliations & Accreditation

PhD Tel Aviv University - Geophysics

MSc Tel Aviv University - Geophysics

BSc Tel Aviv University - Geophysics


Courses Taught
N469: The Practice and Theory of Seismic Depth Imaging

CEU: 2.1 Continuing Education Units
PDH: 21 Professional Development Hours
Certificate: Certificate Issued Upon Completion
RPS is accredited by the International Association for Continuing Education and Training (IACET) and is authorized to issue the IACET CEU. We comply with the ANSI/IACET Standard, which is recognised internationally as a standard of excellence in instructional practices.
We issue a Certificate of Attendance which verifies the number of training hours attended. Our courses are generally accepted by most professional licensing boards/associations towards continuing education credits. Please check with your licensing board to determine if the courses and certificate of attendance meet their specific criteria.