N640 P&ID (Piping and Instrumentation Diagram) and Engineering Drawings Interpretation

Event Facts

Date:
2 - 3 Dec. 2019
Event Code:
T640l19CA
Duration:
2 days
Instructors
Marcel Leal-Valias
Location:
Calgary
Booking Status:
Good Availability
Fee:
CAD $1,495 (Exclusive of tax)
LOGIN TO BOOK A COURSE

Course Facts

Course Code:
N640
Duration:
2 days
Type:
Classroom
CEU:
1.6 Continuing Education Units
PDH:
16 Professional Development Hours
Certificate:
Certificate Issued Upon Completion

Summary

This two-day course focuses on engineering drawings typically used in the chemical and process industries by engineers and technologists in the design phase, and by operations and maintenance staff once facilities are up and running. It is suitable for anyone interested in how drawings should be interpreted, created, maintained, and used in assessing emergency situations and regulatory compliance issues. The combination of classroom instruction and workshop exercises focuses on critical documentation essential to the safe day-to-day operation of facilities (e.g., P&ID, PFD, Plot Plan, Electrical Area Classification, Piping Drawing, Isometric Drawing, Line List, Tie-In List and Shutdown Keys).

Duration and Training Method

Two classroom days providing 1.6 CEU (Continuing Education Credits) or 16 PDH (Professional Development Hours)

Participants will learn to:
1. Explain the relationship of P&ID drawings to facilities and appraise the potential for safety improvements.
2. Understand and evaluate the purpose, content, and importance of process/electrical and engineering drawings from company plants.
3. Interpret P&ID drawings, including valves, equipment, and control/safety systems.
4. Develop and implement strategies to maintain current and accurate drawings throughout the lifecycle of the facility.
5. Provide engineers with the skills to communicate in the same “language” as facility operators during Management of Change scenarios.
6. Recognize emergency situations and assess safety, environmental and regulatory compliance issues such as Process Hazards Analysis (PHA)/HAZOP studies.
7. Construct a foundation for base-level learning and support consistent improvement in quality, staff and leadership communications, and other processes which rely on P&ID drawings.

Day One
1. Introduction
2. Preliminary engineering drawings
        a. Block flow diagram (BFD)
        b. Process flow diagram (PFD)
        c. Material balance
        d. PFD symbols
3. Piping and instrumentation diagrams
        a. Piping and instrumentation diagram (P&ID)
        b. P&ID symbols 
       c. Line numbering 
       d. Valve numbering 
       e. Equipment identification 
        f. Abbreviations
4. Interpreting P&IDs - valves
        a. Valve types
        b. Valve identification
        c. Valve fittings
5. Interpreting P&IDs - equipment
        a. Vessels
        b. Pumps
        c. Heat exchangers
        d. Compressors
        e. Equipment identification 
6. Drawing interpretation workshop #1

Day Two
7. Interpreting P&IDs – control & safety systems
        a. Distributed control systems (DCS)
        b. Safety instrument system (sis)
        c. Instrument symbols
        d. Instrument signal lines 
        e. Pressure instruments
         f. Temperature instruments 
        g. Flow instruments
8. Detailed engineering drawings
        a. Plot plan
        b. Electrical area classification
        c. Piping drawing
        d. Isometric
        e. Material take off 
        f. Line list
        g. Tie-in list
        h. Shutdown key
9. Drawing interpretation workshop #2
10. Engineering drawings for construction and operation
        a. Developing as-builds
        b. Preparing for a PHA (HAZOP, what-if, etc)
        c. Management of change (MOC)
11. Capstone exercise
12. Course wrap-up

Who should attend

This course focuses on engineering drawings typically used in the chemical and process industries by engineers and technologists in the design phase and by operations and maintenance staff once facilities are up and running. It is suitable for employees, managers, officers of corporations and anyone else with an interest in how these drawings should be created, maintained and used in assessing emergency situations and regulatory compliance issues.

 

 

Marcel Leal-Valias

Background
Mr. Leal-Valias has more than 50 years of experience in engineering/design and project management in the petrochemical industry in North and South America and Australia and 27 years as a certified PHA specialist and trainer. He holds a diploma in Mechanical Engineering from Centro de Treinamento Industrial, Rio de Janeiro, Brazil and diplomas in Management and Supervision from People Growth Inc., Los Angeles, USA. Mr. Leal-Valias has conducted a multitude of PHA studies that comply with OSHA Process Safety Management guidelines in North and South America, the Middle East, Asia and the Caribbean and also has delivered P&ID and PHA training courses to many companies in Canada and overseas.

He is a member of ASET, the Society of Piping Engineers and Designers, Project Management Institute and the Canadian Institute of Energy.

Courses Taught
N639 - Introduction to PHA/HAZOP
N640 - P&ID (Piping and Instrumentation Diagram) and Engineering Drawings Interpretation
N641 - PHA/HAZOP Facilitation Training

Alternative Dates for this Course

LOGIN TO BOOK A COURSE

Calgary

Date:
1 - 2 Oct. 2019
Event Code:
T640j19CA
Fee:
CAD $1,495 (Exclusive of tax)
Date:
4 - 5 Nov. 2019
Event Code:
T640k19CA
Fee:
CAD $1,495 (Exclusive of tax)
This is an excellent course for people interested in getting a good handle on reading and understanding P&IDs and Engineering drawings. Our instructor was very knowledgable and approachable, and it was a great experience