N634 Acid Gas Compression and Injection
N634 Acid Gas Compression and Injection
*Seats are currently available for NTA members only - non members will be advised as seats become available, based on the order they applied to the waitlist.
This one-day course provides a comprehensive overview of the design and operational aspects of acid gas compression and injection projects. The presentation includes a detailed discussion of the phase behavior of acid gas and outlines the methods for estimating the properties of acid gas for the design of the compression and injection facilities. It also addresses the methods for controlling corrosion and prevention of the formation of hydrates. Design considerations of compression and cooling equipment, injection line, well completion, and reservoir selection are also discussed. Technical and operations persons involved in the design or operation of acid gas injection projects would greatly benefit from this course. A comprehensive set of course notes is included.
One classroom day providing .8 CEU (Continuing Education Credits) or 8 PDH (Professional Development Hours)
This course is intended for engineers and technologists involved in the specification and design of acid gas compression facilities, and for foremen and operators responsible for the daily operation of such facilities.
Edward Wichert has an extensive background in the oil and gas industry. This includes experience at the technical level as well as in management in drilling, oil and gas production and processing, reservoir engineering and economic analysis. He gained this experience through employment in the oil and gas industry in Alberta, with small, intermediate and large companies. He holds a B. Sc. degree in Petroleum Engineering and a Master's degree in Chemical Engineering. His research interests are mainly related to sour gas. He has published several articles dealing with determining the properties of sour gas and the application of technology in sour gas production and processing, as well as the disposal of acid gas by compression and injection.
He is an independent oil and gas industry consultant in Calgary, and was Adjunct Professor in the Department of Chemical and Petroleum Engineering at the University of Calgary from 1996 to 2005. He has presented courses in natural gas technology worldwide, and is the recipient of the Award of Merit from the Canadian Gas Processors Association, in 1994, the Lifetime Achievement in Hydrocarbon Measurement award from the Canadian Institute of Hydrocarbon Measurement, in 2003, and the Project, Facilities and Construction Award from the Society of Petroleum Engineers. He has recently written a comprehensive book on the technology of sour gas production, gathering, treating, and the different methods of acid gas disposal.
Affiliations and Accreditation
Member of Retirees, Canadian Gas Processors Association, 2018
Member of APEGA since July, 1961
Lifetime Member of SPE
BSc Degree in Petroleum Engineering, 1958
MEng Degree in Chemical Engineering, 1970
Adjunct Professor in Chemical and Petroleum Engineering, University of Calgary, 1996 to 2005
Recipient of the following industry awards:
- Award of Merit, Canadian Gas Processors Association, 1994
- Lifetime Achievement in Hydrocarbon Measurement, Canadian Institute of Hydrocarbon
- Project, Facilities and Construction Award, Society of Petroleum Engineers, 2008
Authored or Co-authored over 20 technical articles (CV at www.grayjay.ventures)
Wrote “The Sour Gas, Sulfur and Acid Gas Book”, 2018 (The Book at www.grayjay.ventures)
N632 - Acid Gas Compression and Injection
N635 - Metering of Natural Gas and Associated Liquids
N632 - Sour Gas Treating
Our Safety Management Systems ensure that every course is risk managed appropriately to enable quality, safe and enjoyable learning to take place in the field environment.
To learn more about how RPS manages your health and safety, visit the HSE section of this site.